 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CYStech Electronics Corp. 1.0Amp. Surface Mount Fast Recovery Diodes Spec. No. : C340SA Issued Date : 2003.06.24 Revised Date : Page No. : 1/3 CFR10XSA Series Features * For surface mounted applications. * Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 * Low leakage current * High surge capability * High temperature soldering: 250C/10 seconds at terminals * Exceeds environmental standards of MIL-S-19500/228 Mechanical Data * Case: Molded plastic, SMA/JEDEC DO-214AC * Terminals: Solder plated, solderable per MIL-STD-750 method 2026 * Polarity: Indicated by cathode band. * Packaging: 12mm tape per EIA STD RS-481. * Weight: 0.064 gram, 0.002 ounce Maximum Ratings and Electrical Characteristics (Rating at 25C ambient temperature unless otherwise specified. ) Parameter Repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum instantaneous forward voltage, IF=1A (Note 1) Reverse Recovery Time Average forward rectified current @TA=55 Peak forward surge current @8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum DC reverse current VR=VRRM,TA=25(Note 1) VR=VRRM,TA=100(Note 1) Maximum thermal resistance, Junction to ambient Diode junction capacitance (Note 2) Storage temperature Operating temperature Symbol VRRM VRMS VR VF trr IO IFSM CFR 101 50 35 50 1.3 150 CFR 102 100 70 100 1.3 150 CFR 103 200 140 200 1.3 150 Type CFR 104 400 280 400 1.3 150 1 30 CFR 105 600 420 600 1.3 250 CFR 106 800 560 800 1.3 500 CFR 107 1000 700 1000 1.3 500 Units V V V V ns A A IR Rth,JA CJ Tstg TJ 5 100 32 (typ) 15 (typ) -55 ~ +150 -55 ~ +150 A A /W pF Notes : 1. Pulse test, pulse width=300sec, 2% duty cycle 2 . f=1MHz and applied 4.0VDC reverse voltage. CFR10XSA CYStek Product Specification CYStech Electronics Corp. Characteristic Curves Forward Current Derating Curve 1.2 Average Forward Current---I O(A) Forward Current---I F(A) 1 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 Ambient Temperature---TA() Single Phase, Half Wave 60Hz, Resistive or Inductive Load Spec. No. : C340SA Issued Date : 2003.06.24 Revised Date : Page No. : 2/3 Forward Current vs Forward Voltage 100 10 1 Tj=25 Pulse Width=300s Duty Cycle=1% 0.1 0.01 0.6 0.8 1 1.2 1.4 1.6 1.8 2 Forward Voltage---VF(V) Maximum Non-Repetitive Forward Surge Current 40 Peak Forward Surge Current--IFSM(A) Junction Capacitance---C J(pF) 40 35 30 25 20 15 10 5 0 1 10 Numbers of Cycles at 60Hz 100 0.01 Junction Capacitance vs Reverse Voltage 30 Tj=25, 8.3ms Single Half Sine Wave, JEDEC method 20 10 0 0.1 1 10 100 Reverse Voltage---VR(V) CFR10XSA CYStek Product Specification CYStech Electronics Corp. SMA/DO-214AC Dimension Marking Code: Device CFR 101 CFR 102 Spec. No. : C340SA Issued Date : 2003.06.24 Revised Date : Page No. : 3/3 CFR 103 CFR 104 Code F11 F12 CFR 106 F13 CRF 107 F14 Device CFR 105 Code F15 F16 F17 SMA Plastic Surface Mounted Package CYStek Package Code:SA *:Typical DIM A B C D Inches Min. Max. 0.177 0.185 0.094 0.110 0.012(typ) 0.150 0.165 Millimeters Min. Max. 4.4 4.8 2.4 2.8 0.3(typ) 3.8 4.2 DIM E F G - Inches Min. Max. 0.060 0.067 0.04(typ) 0.04(typ) - Millimeters Min. Max. 1.5 1.7 1.0(typ) 1.0(typ) - Notes : 1.Controlling dimension : millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material : * Lead : 42 Alloy ; solder plating * Mold Compound : Epoxy resin family, flammability solid burning class:UL94V-0 Important Notice: * All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. * CYStek reserves the right to make changes to its products without notice. * CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. * CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. CFR10XSA CYStek Product Specification |
Price & Availability of CFR10XSA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |